TOPIC:  HOW TO ENABLE Wy60 TO PASS NULL'S IN PCTERM 

DATE:   3/27/92

PRODUCT:  WY60

THE ISSUE:
     The KIMTRON terminal passes null's by default, Wy60 does not.

OVERVIEW:
     All other Wyse terminals that support PCTERM personality will
     pass Null's to printer by default as does the KIMTRON pc
     terminal.  The Wy60 does not.        

RESOLUTION:
     While in the PCTERM personality on the Wy60 you must send down
     an escape sequence to the terminal to tell it to stop
     suppressing null's.  

     Null suppress off(pass null's)        ESC v =
     Null suppress on(don't pass null's)   ESC v <

     This must be sent every time the mode is changed or the
     terminal is turned off.

NOTE:  Only use these commands with the Wy60.  Using these commands
on other wyse terminals in PCTERM personality can cause the
terminal to change to a TEKTRONIX emulation.

=-=-=-=-=-=-=-=-=-=-=-=-=   DISCLAIMER   -=-=-=-=-=-=-=-=-=-=-=-=-=
This information is intended to inform WYSE personnel and WYSE
customers of certain issues in a timely fashion. The information
has not been extensively verified or tested. WYSE does not warrant
the information to be correct, although reasonable effort has been
taken to prevent gross inaccuracies. WYSE publishes formal
technical communiques in the form of Product Bulletins and warrants
the data in Product Bulletins to be accurate at the time of the
release.