TOPIC:  ANSI PRINT COMMANDS

DATE:  6/30/93

PRODUCT:   WY120  WY150  WY160  WY185  WY285  WY325  WY370  WY520
           WY120es  WY150es  WY160es  WY185es  WY285es WY325es
           WY520es  WY85  WY99GT

THE ISSUE:
        Commands to enable and disable print modes.

RESOLUTION:

        Page print (prints all information currently displayed on
        terminal screen)

                    Octal              Decimal            Hex
        ESC[0i   033 133 060 151    027 091 048 105    1B 5B 30 69

        Auto print (prints on both the terminal and the printer,
        terminal can interact with the system during this process)

   Print on:
                    Octal              Decimal             Hex

   ESC[?5i   033 133 077 065 151   027 091 063 053 105  1B 5B 3F 35 69

   Print off:

   ESC[?4i   033 133 077 064 151   027 091 063 052 105  1B 5B 3F 34 69

    Controller print (print is passed through the terminal and
    displayed only on the printer)
    The terminal will pass all codes, but the print on and off
    commands, and Xon Xoff commands if this type of handshaking
    is being used. The terminal will not interact with the
    operating system during the print.

    Print on:
                 Octal            Decimal             Hex

    ESC[5i    033 133 065 151    027 091 053 105     1B 5B 35 69

    Print off:
                 Octal            Decimal             Hex

    ESC[4i    033 133 064 151    027 091 052 105     1B 5B 34 69


========================= DISCLAIMER ==========================================
  This information is intended to inform WYSE personnel and WYSE
  customers of certain issues in a timely fashion.  The information
  has not been extensively verified or tested.  WYSE does not warrant
  the information to be correct, although reasonable effort has been
  taken to prevent gross inaccuracies.  WYSE pubslishes formal
  technical communiques in the form of Product Bulletins and warrants
  the data in Product Bulletins to be accurate at the time of the
  release.