TOPIC: PROBLEMS USING PRINT SCREEN KEY ON WY150 AND WY60 IN PCTerm

DATE:   6/11/92

PRODUCT:  Wy150, Wy60

THE ISSUE:
        Problems using print screen key on Wy150 and Wy60 in PCTerm

OVERVIEW:
        Some customers will expect the terminal to print the screen
        to the printer that is attached to the terminal when they hit
        the print screen key on the enhanced p.c. style keyboard when
        running PCTerm personality on the Wy150 and Wy60.

RESOLUTION:
        When in PCTerm the print screen key does not act as a local
        keyboard command.  Instead the print screen key actually sends
        the appropriate scan codes to the host computer.  To make the
        print screen key act as a local keyboard command you must
        actually go in to setup and  turn block mode on.  After
        exiting setup you can then hit the print screen key and it
        should print the contents of the screen to the attached
        printer.  Remember to put yourself back in to full duplex
        afterward.


=-=-=-=-=-=-=-=-=-=-=-=-=   DISCLAIMER   -=-=-=-=-=-=-=-=-=-=-=-=-=
This information is intended to inform WYSE personnel and WYSE
customers of certain issues in a timely fashion. The information
has not been extensively verified or tested. WYSE does not warrant
the information to be correct, although reasonable effort has been
taken to prevent gross inaccuracies. WYSE publishes formal
technical communiques in the form of Product Bulletins and warrants
the data in Product Bulletins to be accurate at the time of the
release.