TITLE:  ANSWERBACK CONCEAL PARAMETER IN SETUP ON WY-60 TERMINAL

DATE:   6/4/92

PRODUCT:  WY60

THE ISSUE:
        Can't toggle answerback conceal of the WY-60

RESOLUTION:
        On the WY-60 terminal, there is an answerback conceal
        parameter in setup under the DISPLAY menu <F1>. This
        parameter may be toggled once, but cannot be changed
        after toggling one time.

        The work around for this problem is to "DEFAULT ALL" in
        the first setup menu.  This will allow you to toggle
        answerback ONE TIME.

        Remember to also change the other operating parameters to
        match your system requirements.


=-=-=-=-=-=-=-=-=-=-=-=-=   DISCLAIMER   =-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  This information is intended to inform WYSE personnel and WYSE
  customers of certain issues in a timely fashion. The information
  has not been extensively verified or tested. WYSE does not warrant
  the information to be correct, although reasonable effort has been
  taken to prevent gross inaccuracies. WYSE publishes formal technical
  communiques in the form of Product Bulletins and warrants the data
  in Product Bulletins to be accurate at the time of the release.