TITLE:  WY60 7 BIT AND 8 BIT HANDLING

DATE:     11/15/90

PRODUCT:       WY60

THE ISSUE:
       Inability of older WY60's to use 8 bit data.

RESOLUTION:
       Older WY60's will not support 8 bit data at all, while
       newer revisions of firmware will support 8 bit data
       transfer under some operations.  When using the wy60 in
       the secondary receive mode, ( data entering the terminal
       through the AUX port ), and bidirectional mode The terminal
       will only support 7 bit data.  However the Aux Print and
       Transparent Print mode will pass 8 bit data if you have a
       WY60 with firmware revs D4 (250599-01),  F1 ( 250933-01 ),
       and G2 ( 251057-01 ).

=-=-=-=-=-=-=-=-=-=-=-=-=   DISCLAIMER   =-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  This information is intended to inform WYSE personnel and WYSE
  customers of certain issues in a timely fashion. The information
  has not been extensively verified or tested. WYSE does not warrant
  the information to be correct, although reasonable effort has been
  taken to prevent gross inaccuracies. WYSE publishes formal technical
  communiques in the form of Product Bulletins and warrants the data
  in Product Bulletins to be accurate at the time of the release.