TITLE: Miswired CRT connector

DATE:  8/6/91

PRODUCT:  WY85  WY99GT  WY50

THE ISSUE:
       The Monitor Power Supply board I just installed fails

OVERVIEW:
        Improper marking (silk screen) for position of the
        "Blk" and "Brn" CRT connector wires on the Monitor Power
        Supply PCB.

RESOLUTION:
        Desolder the connector wires from the PCBD. Change positions
        of the Brown, and Black wires...re-label the PCBD properly.

=-=-=-=-=-=-=-=-=-=-=-=-=   DISCLAIMER   =-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  This information is intended to inform WYSE personnel and WYSE
  customers of certain issues in a timely fashion. The information
  has not been extensively verified or tested. WYSE does not warrant
  the information to be correct, although reasonable effort has been
  taken to prevent gross inaccuracies. WYSE publishes formal technical
  communiques in the form of Product Bulletins and warrants the data
  in Product Bulletins to be accurate at the time of the release.