TITLE: CLEARING OF DEFAULT TABS ON THE WY60

DATE: 7/19/91

PRODUCT: WY60

THE ISSUE:
       Some customers are concerned that when they power off
       the terminal, upon powering it on again the default tabs
       have been cleared.

RESOLUTION:
       To prevent clearing of tabs make sure that the "INIT
       TABS" in the F2(General) setup screen in setup is set
       to "on".  Save this when exiting setup and your tabs
       will remain next time you turn on and off the terminal
       again.

=-=-=-=-=-=-=-=-=-=-=-=-=   DISCLAIMER   =-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  This information is intended to inform WYSE personnel and WYSE
  customers of certain issues in a timely fashion. The information
  has not been extensively verified or tested. WYSE does not warrant
  the information to be correct, although reasonable effort has been
  taken to prevent gross inaccuracies. WYSE publishes formal technical
  communiques in the form of Product Bulletins and warrants the data
  in Product Bulletins to be accurate at the time of the release.