TITLE: PARAMETERS FOR SETTING UP WY60/WY50 WITH PICK O/S

DATE: 6/21/91

PRODUCT:   WY50  WY60

THE ISSUE:
       What are the setup for connecting Wy50's & Wy60's to PICK O/S?

RESOLUTION:
       PICK has informed us that you should run these terminals
       in native mode, 8 data bits, 1 stop bit, no parity, with
       CAPS LOCK on.

=-=-=-=-=-=-=-=-=-=-=-=-=   DISCLAIMER   =-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  This information is intended to inform WYSE personnel and WYSE
  customers of certain issues in a timely fashion. The information
  has not been extensively verified or tested. WYSE does not warrant
  the information to be correct, although reasonable effort has been
  taken to prevent gross inaccuracies. WYSE publishes formal technical
  communiques in the form of Product Bulletins and warrants the data
  in Product Bulletins to be accurate at the time of the release.