OPIC:   Does the WY-60 have a parallel aux port?

DATE:   06/01/90

PRODUCT:        WY-60

THE ISSUE:
        Does the WY-60 have a parallel aux port?

RESOLUTION:
        Wy60's ship with a serial AUX port.  A parallel port
        option board may have been installed on your terminal.
        To determine if you Wy60 has had the parallel option
        installed go in to setup. In setup the F4 COMM settings
        will only contain modem port information if you have the
        parallel option.  If your terminal has setup parameters
        to set the baud rate and communication parameters for both
        the Modem and Aux port you know the terminal is a standard
        WY60 which has not been modified with the parallel port
        option board.

=-=-=-=-=-=-=-=-=-=-=-=-=   DISCLAIMER   =-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  This information is intended to inform WYSE personnel and WYSE
  customers of certain issues in a timely fashion. The information
  has not been extensively verified or tested. WYSE does not warrant
  the information to be correct, although reasonable effort has been
  taken to prevent gross inaccuracies. WYSE publishes formal technical
  communiques in the form of Product Bulletins and warrants the data
  in Product Bulletins to be accurate at the time of the release.