TOPIC:  Enhanced P.C. keyboard won't work on a WY60

DATE:   06/01/90

PRODUCT:        WY-60

THE ISSUE:
        The Enhanced P.C. style keyboard does not function correctly.

RESOLUTION:
        Contact Technical support at 1 (800) 800 9973.  They will
        check to see what firmware revision you have.  The EPC
        keyboard was not supported on early production WY60's.
        Most likely you will need to hire a service center to do a
        pre-ansi(VT100) to post-ansi upgrade.  This upgrade involves
        not only changing firmware but also changing the processor
        chip and doing a cut and jump to the board.
	This keyboard was not supported originally on the WY-60. 

=-=-=-=-=-=-=-=-=-=-=-=-=   DISCLAIMER   =-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  This information is intended to inform WYSE personnel and WYSE
  customers of certain issues in a timely fashion. The information
  has not been extensively verified or tested. WYSE does not warrant
  the information to be correct, although reasonable effort has been
  taken to prevent gross inaccuracies. WYSE publishes formal technical
  communiques in the form of Product Bulletins and warrants the data
  in Product Bulletins to be accurate at the time of the release.