TOPIC:  Use the same cable for the MODEM and the AUX port on WY60?

DATE:   06/01/90

PRODUCT:        WY-60

THE ISSUE:
        Can I use the same cable for the modem port and the aux port?

RESOLUTION:
        No, the direction of the signals are different on the modem
        port and the aux port. The modem port is a DTE port and the
        Aux port is a DCE port.  Check your users guide for pinouts
        or call Technical Support and they can fax you the WY60 
        Interface Guide which also has pinouts as well as some basic
        do's and dont's about hooking the Wy60 to peripherals.

=-=-=-=-=-=-=-=-=-=-=-=-=   DISCLAIMER   =-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  This information is intended to inform WYSE personnel and WYSE
  customers of certain issues in a timely fashion. The information
  has not been extensively verified or tested. WYSE does not warrant
  the information to be correct, although reasonable effort has been
  taken to prevent gross inaccuracies. WYSE publishes formal technical
  communiques in the form of Product Bulletins and warrants the data
  in Product Bulletins to be accurate at the time of the release.