TOPIC:  TERMINAL HEIGHT ADJUSTABLE ARM  SPECS

DATE:   03/29/91

PRODUCT:        WY150  WY120  WY160  WY185

THE ISSUE:
        The dimensions for the height adjustable arm

OVERVIEW:
        The part number of the Height Adjustable Arm for the
        1xx series WYSE Terminals is 900581-01

RESOLUTION:
        These measurements were take on a 1xx series terminal,
        from the desk level to the bottom of the viewing area.

        Specific dimensions may vary depending on the terminal the arm
        is attached to.

        Folded Down     175mm          approx. 6 7/8"
        Extended Up     320mm           approx. 12 3/4"
        Change          145mm           approx.  7 5/8"

        The difference in heights is achieved by rotating through a
        67 degree arc.


=-=-=-=-=-=-=-=-=-=-=-=-=   DISCLAIMER   =-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  This information is intended to inform WYSE personnel and WYSE
  customers of certain issues in a timely fashion. The information
  has not been extensively verified or tested. WYSE does not warrant
  the information to be correct, although reasonable effort has been
  taken to prevent gross inaccuracies. WYSE publishes formal technical
  communiques in the form of Product Bulletins and warrants the data
  in Product Bulletins to be accurate at the time of the release.