TOPIC:  BI-DIRECTIONAL PRINT in TVI 920 Mode

DATE:   12/17/90

PRODUCT:        WY-60

THE ISSUE:
        How do I get Bi-Directional mode on a WY60 in TVI 920 mode?

RESOLUTION:
        1) data/printer = Aux/modem
        2) Comm with host on aux port. This will allow enabling both
           AUX Print & Bi-Directional modes.
           CAUTION:  The port configurations are different.  You will
                     have to change your cabling.
        3) When you establish communication from the remote site,
           send the Bi-Directional mode ON command to this terminal.

           HOST----------------"this" terminal----------------remote

           Bi-Directional mode has been tested and verified.
           Refer to Page 40 of WY60 Programmer's Guide.

=-=-=-=-=-=-=-=-=-=-=-=-=   DISCLAIMER   =-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  This information is intended to inform WYSE personnel and WYSE
  customers of certain issues in a timely fashion. The information
  has not been extensively verified or tested. WYSE does not warrant
  the information to be correct, although reasonable effort has been
  taken to prevent gross inaccuracies. WYSE publishes formal technical
  communiques in the form of Product Bulletins and warrants the data
  in Product Bulletins to be accurate at the time of the release.