TOPIC:  PRINT Command sent to Terminal , No Printer Attached

DATE:   12/06/90

PRODUCT:        WY-160

THE ISSUE:
        Print command is sent to the terminal, NO printer attached.

RESOLUTION:
        This works on a single host only: Set the Printer Port
        to SERIAL 2. Doing this will allow the 160 to continue
        to interact with the host.  If the Printer port is set
        to PARALLEL; the terminal will stop. (LOCK UP)

        If the terminal is configured for dual host, 2 sessions,
        the terminal will stop. (LOCK UP)

=-=-=-=-=-=-=-=-=-=-=-=-=   DISCLAIMER   =-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  This information is intended to inform WYSE personnel and WYSE
  customers of certain issues in a timely fashion. The information
  has not been extensively verified or tested. WYSE does not warrant
  the information to be correct, although reasonable effort has been
  taken to prevent gross inaccuracies. WYSE publishes formal technical
  communiques in the form of Product Bulletins and warrants the data
  in Product Bulletins to be accurate at the time of the release.