TOPIC:  THE WY-60 WILL NOT PRINT 8-BIT DATA?

DATE:   11/15/90

PRODUCT:        WY-60

THE ISSUE:
        The WY-60 will not print 8-bit data.

RESOLUTION:
        When using the WY60 in the secondary receive mode and
        bi-directional mode, you must be using 7 bit data.
        However, the Aux Print and Transparent Print mode will
        pass 8 bit data if you have a WY60 with firmware revisions
        D4, F1, and G2.  Part #'s 250599-01, 250933-01, and
        251057-01 respectively.

=-=-=-=-=-=-=-=-=-=-=-=-=   DISCLAIMER   =-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  This information is intended to inform WYSE personnel and WYSE
  customers of certain issues in a timely fashion. The information
  has not been extensively verified or tested. WYSE does not warrant
  the information to be correct, although reasonable effort has been
  taken to prevent gross inaccuracies. WYSE publishes formal technical
  communiques in the form of Product Bulletins and warrants the data
  in Product Bulletins to be accurate at the time of the release.