TOPIC:  ASCII different  PRINT STATUS codes

DATE:   08/22/89

PRODUCT:        WY-60, WY-370, WY-85

THE ISSUE:
        Conflict -- WY60 reports different "Printer Ready" Codes

OVERVIEW:
        Some operating system, particularly VMS will check the terminal's
        AUX port for a printer with an ESC [?15n.  These terminals will
        respond with an ESC [?10n or "Printer Ready" message, even if
        there is nothing attached to the Aux port.

RESOLUTION
        Your only option to change this response would be to tie
        pin 3 to pin 20 on the Aux port.  This will return an
        ESC [?11n or "printer busy" message. This is a hardware
        related problem that doesn't exist on the WY99GT, WY150 or
        WY160.  These terminals have the capability of sending an
        ESC [?13n or "no printer connected" message.

=-=-=-=-=-=-=-=-=-=-=-=-=   DISCLAIMER   =-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  This information is intended to inform WYSE personnel and WYSE
  customers of certain issues in a timely fashion. The information
  has not been extensively verified or tested. WYSE does not warrant
  the information to be correct, although reasonable effort has been
  taken to prevent gross inaccuracies. WYSE publishes formal technical
  communiques in the form of Product Bulletins and warrants the data
  in Product Bulletins to be accurate at the time of the release.