TOPIC:  How do you disable the terminal's keyclick on a Wy50?

DATE:   06/01/90

PRODUCT:        WY-50

THE ISSUE:
        How do you disable the terminal's keyclick?

RESOLUTION:
    By pressing the <SHIFT> and the <ENTER> key simultaneously (the
    <ENTER> on the numeric keypad.), it will toggle the audible
    keyclick on or off.  If you want the keyclick to be off the next
    time you power up, then you must toggle the keyclick off and then
    save it in setup. To do this, hold <Shift> and press <Setup>;
    once you are in the setup mode, immediately exit: hold <Shift> and
    press <Setup>; when you see "SAVE CHANGES FOR POWER ON?" press <A>.
   
=-=-=-=-=-=-=-=-=-=-=-=-=   DISCLAIMER   =-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  This information is intended to inform WYSE personnel and WYSE
  customers of certain issues in a timely fashion. The information
  has not been extensively verified or tested. WYSE does not warrant
  the information to be correct, although reasonable effort has been
  taken to prevent gross inaccuracies. WYSE publishes formal technical
  communiques in the form of Product Bulletins and warrants the data
  in Product Bulletins to be accurate at the time of the release.