TOPIC:  How to get in and out of WYSECALC or WYSEWORKS

DATE:   06/27/90

PRODUCT:  WY-60 (WY150*) (WY30) (WY50)

THE ISSUE:
        How to get in and out of WYSECALC or WYSEWORKS on a Wy60
        

RESOLUTION:
        CTRL & CAPSLOCK will toggle the operator into and out of
        WYSECALC/WYSEWORKS.

        *WYSECALC was deleted from the WY150 Firmware Rev 4.3 and
         beyond in the WY150.

NOTE:  Most Wy30's, Wy50's and Wy150's do not contain WYSEWORKS.

=-=-=-=-=-=-=-=-=-=-=-=-=   DISCLAIMER   =-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  This information is intended to inform WYSE personnel and WYSE
  customers of certain issues in a timely fashion. The information
  has not been extensively verified or tested. WYSE does not warrant
  the information to be correct, although reasonable effort has been
  taken to prevent gross inaccuracies. WYSE publishes formal technical
  communiques in the form of Product Bulletins and warrants the data
  in Product Bulletins to be accurate at the time of the release.