Firmware Identification Procedure

                                  WY99GT

                        AUX Port  -  Female Connector

 1. Jumper pins 2 & 3 on the AUX Port, these are the second and third pins
    from the upper right hand corner as you look directly at the port from
    the back of the terminal.
                                             _
                       13                   | |  1
                      _____________________ | | ____
                      \ o o o o o o o o o o o o o  /
                       \ o o o o o o o o o o o o  /
                        \_______________________ /
                         25                    14

 2- In SETUP (F3) change the following parameters:

      A.  Under F1  STATUS LINE = STANDARD

      B.  Under F2  PERSONALITY = WY 99 GT (native mode)

      C.    "   "   COMM MODE = FULL DUPLEX

      D.  Under F4  DATA/PRINTER = AUX/MODEM

    Exit SETUP by striking F10 two times.

 3- Caps lock must be turned off.

 4- Depress the ESC key (or control [ at the same time if you are using the
    DEC VT220 style keyboard).

 5- Depress the d key

 6- Turn on the caps lock, CAPS should display on the status line

 7- Depress a shift and " at the same time (" is near the enter key)


 You should see an alpha-numeric string display on your screen that will
 include the firmware revision number, date, and abbreviated WYSE Technology.

 For Example:      RBNFB14 1986 WYSE TECHNOLO

 B14 is the firmware revision, Copyright 1986, etc.

 If your firmware inquiry results in a "BETA" firmware revision please call
 (408) 435-2770, terminal technical support for an upgrade.




=-=-=-=-=-=-=-=-=-=-=-=-=   DISCLAIMER   =-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  This information is intended to inform WYSE personnel and WYSE
  customers of certain issues in a timely fashion. The information
  has not been extensively verified or tested. WYSE does not warrant
  the information to be correct, although reasonable effort has been
  taken to prevent gross inaccuracies. WYSE publishes formal technical
  communiques in the form of Product Bulletins and warrants the data
  in Product Bulletins to be accurate at the time of the release.